RockWorks | Utilities | Survey Menu
Use the tools in the Utilities | Survey menu to perform various statistical computations and generate graphs.
- Bearing/Inclination/Distance: Converts bearing-distance-inclination survey data to XYZ coordinates, a 2D map, and/or a 3D diagram
- Triangulation: Converts triangulation survey data to XYZ coordinates for display in the current datasheet
- Setup XY Stations: Creates a new set of X,Y coordinates based on a single user-entered coordinate, a known grid-based station arrangement, and a user-entered spacing
- Interpolate Points Along Line: Creates a new set of X,Y coordinates based on beginning and ending coordinates of a line, and the point spacing along that line
- Borehole Survey: Reads depths, bearings, and inclinations from the datasheet, and computes XYZ coordinates at user-specified intervals down the borehole; it also offers a 2D and 3D diagram view of the deviated borehole.
- XYZ -> Optimal Path: Reads a listing of XYZ "intercept" points and computes an optimal path between the points, given a user-defined distance increment and maximum angle.
- XYZ Points: This program outputs a detailed report which includes drilled depth, azimuth, inclination, true depth, and distance between the path and intercept points.
- Downhole Survey: This program outputs a listing of the measured depth, azimuth, and inclination of the computed path.
- Plot 3D Path: This program output a 3D display of the intercept points (as spheres) and the computed path (as a 3D tube).
- Lateral GeoSteering Diagram: This program reads planned downhole survey data, actual downhole survey data, gamma, resistivity, and gas data from four designated datasheets and produces a 2D profile diagram showing a depth versus elevation plot showing the difference between the planned and the actual survey.
- Lateral 3D Geosteering Comparison: This program reads planned downhole survey data and actual survey data from two designated datasheets and plots the planned wellpath and the actual wellpath in 3D.
- Claim Area: Reads a listing of XY corner points (4 pairs) from the datasheet, computes the area represented within each claim block, in the project output units, and records these measurements into the designated column in the datasheet
- Lease Area: Reads a listing of lease descriptions from the datasheet, computes the area represented within each lease using the RockWare Landbase, and records these measurements into the designated column in the datasheet
Back to Utilities Summary
RockWare home page