RockWorks | Datasheet | File | Import | Google Earth | XYZ Coordinates
This program:
- Reads a listing of placemark locations that have been copied or saved in Google Earth.
- Extracts the coordinates from the Google Earth KML structure, converting the coordinates if requested.
- Lists the X, Y, and Z coordinates in the current RockWorks datasheet.
Menu Options
Step-by-Step Instructions
- Input: Use these settings to define the input for the point data.
- Windows Clipboard: Choose this option if you have copied the point locations in Google Earth.
- KML or KMZ File: Choose this option if you have saved the point locations in Google Earth, in a KML or KMZ file.
- Input File: Click to the right to browse for the KML or KMZ file containing the point data to be brought into RockWorks.
- Output: Use these settings to determine the coordinate system and units in which you want the coordinates to be recorded within RockWorks.
- Horizontal (XY) Coordinates and Units
- Lon/Lat: Select this option to list the coordinates in decimal longitude (X) and latitude (Y) degrees.
- Local: Select this option to list the coordinates in local feet or meters. Click this tab to define:
- Origin Longitude: Click to the right to enter the decimal longitude coordinate at your local coordinate origin (0,0).
- Origin Latitude: Click to the right to enter the decimal latitude coordinate at your local coordinate origin (0,0).
- Units: Choose whether the local coordinates are to represent feet or meters.
- SPC: Select this option to list the coordinates in a US State Plane coordinate system. Click this tab to define:
- Zone: Click the large button to choose the State Plane Zone within which the coordinates are to be based.
- Units: Choose whether the State Plane coordinates are to represent feet or meters.
- UTM: Select this option to list the coordinates in a UTM coordinate system. Click this tab to define:
- Datum: Click to choose the UTM Datum
- Zone: Click to choose the UTM Zone within which the coordinates are to be based.
- Units: Choose whether the UTM coordinates are to represent feet or meters.
- Other: Select this option to select a custom coordinate system. (More info)
- Vertical / Elevation (Z) Units: Choose whether you want the elevations listed in Feet or Meters units.
- In Google Earth, create the placemark locations you wish to bring into RockWorks. Or, locate the placemark group that currently exists in your Saved Places listing.
- Right-click on the placemark group, and choose Copy from the pop-up menu.
Or, right-click on the placemark group, and choose Save Place As to save the locations in a KMZ file.
- Start up RockWorks if necessary.
- Access the Datasheet program tab.
- Create a new datasheet if necessary.
- Select the RockWorks | Datasheet | File | Import | Google Earth | XYZ Coordinates menu option.
- Enter the program settings as described above.
- Click the yellow Process button to continue.
The program will scan the data in the clipboard or specified KML/KMZ file. It will perform any coordinate conversions which are requested, and record the point locations in the Datasheet. The coordinate system and units will be displayed in the column headings. Any coordinate reference data will be included in the metadata, displayed along the right side of the datasheet.
Back to Importing Data
"Google" is a trademark of Google Inc.
RockWare home page