Tutorial: Restore Program Defaults

The purpose of this step is to reset all of the menu settings to their factory defaults. This will eliminate the need to establish dozens and dozens of settings as you go through the tutorial.

!!! NOTE !!! This will set all of the menu options for this Samples project folder to the RockWare defaults. This means that if you have done a lot of work within this project, these settings will be lost. If this is a worry for you, you might consider the following: Before restoring the factory defaults, you can use the Setup | Export option to store all of your current settings in a file that can later be imported back into the program using the Setup | Import option.

1. If you have just installed RockWorks you can skip this step because program defaults have already been established. (Click the Next button below.)
   
2. If you’ve been running RockWorks for a while (or if you aren’t sure), you should click on the Setup menu at the top of the program window and choose Reset.
   
3. Establish these menu options:
   • Reset Global Settings: Uncheck this item.
   • Reset Project Settings: Check this item. It will reset the project-specific settings to factory defaults.
   • 
     
4. Click on the Continue button at the bottom of the window.
   
5. Click Yes when prompted if you are sure that you wish to do this.
   
6. RockWorks will restore all of the settings of all of the menus to the project defaults.
   

  Back to main menu     |     Next (Output Dimensions) 

RockWare home page