Import LAS Data - Set up the Orientation Data

On the next screen you can select whether any downhole survey information is to be imported from the LAS curve table into the LogPlot Orientation datasheet.

1. Import Orientation Data: Insert a check here to import bearing and dip measurements into the LogPlot Orientation datasheet.
   • Azimuth: Select the name of the curve in the LAS file that contains the azimuth (0 to 360) degree measurements.
     ! If you would like to review the names of all of the curves in the LAS file, you can click the Back button to return to the previous screen where the curve names are all listed.
   • Inclination: Select the name of the curve in the LAS file that contains the inclination measurements.
   • Decimate Data: Insert a check here if you want to resample the input orientation data, by depth. This can be helpful if, for example, the LAS data is recorded at 0.1 foot intervals but you've determined that 1-foot intervals are adequate for survey purposes in LogPlot. If you set this to "2" then every other measurement will be brought in. If you set this to "5" then every 5th measurement will be imported.
   • 
     
2. Click on the Next button.

  Back to Importing LAS Data    |    Next: Set up the Final Parameters 

RockWare home page