Export RockPlot3D Scenes to a BMP Format

RockPlot3D | File | Export | BMP

Use RockPlot3D's BMP export tool to create bitmap images of the current 3D view, at any resolution.

Dimensions (pixels): The Width and Height defaults displayed here represent the current size of the 3D View pane on your screen display, at 96 pixels per inch. For example, if the View pane were 10 inches wide on your screen, the default Width in pixels would be 960.
- If you leave the resolution settings as-is, the exported bitmap will look just like the current screen display. This may be OK for display of the exported image on the screen, but the resolution may be low for print output.
- You can adjust these pixels to increase or decrease the resolution of the output bitmap.
  - For display on a computer screen, adjust the Dimensions settings using this formula:
    desired output size (in inches) x 96 pixels per inch
    For example, if you needed an image that was 5 inches wide at 96 pixels per inch, you would set the Width to 480.
  - For high resolution print output, adjust the Dimensions settings using this formula:
    desired output size (in inches) x desired output resolution (in pixels per inch)
    For example, if you needed an image that was 5 inches wide at 300 pixels per inch, you would set the Width to 1500.
Maintain aspect ratio: Insert a check in this box to keep the current width-to-height ratio constant as you adjust the bitmap resolution. This means that as you edit the dimensions of one axis, the other will be updated automatically. Leave this box unchecked to vary the axes independently.
BMP Color Options: Click on the drop-down list to select the color depth for the image.
Background Color: Choose the color to be represented as the background in the output bitmap. This can be different than the current RockPlot3D background color.
File Name: Click on the button to enter the name to assign to the BMP file to be created.
Display in Default Browser: Check this box to load the output file automatically in the default BMP file viewer on your computer.

If necessary, open the Rw3D file you wish to export. (See Opening a RockPlot3D Scene.)
Adjust the image view to your satisfaction. This includes, but is not limited to, the rotation angle, zoomed-in state, vertical exaggeration, etc. This is important because the bitmap will be captured from the current 3D View.
Select the Export command from the File menu. A pop-up menu will display the export options. Select the BMP option.
Enter the requested menu options, described above.
Click OK to proceed.

The program will store on disk the current image in a Windows Bitmap format, at the requested resolution. If requested it will be loaded into your default viewer.

Back to Exporting Images

RockWare home page